Begin with 12 inches of wire.
24 gauge is easiest to work with.
Make
2 loops large enough
to put on a chain or collar.
With this size wire, two loops
will be more durable.
Twist the wire toward the double loop.
Place the wire behind the TouchStone.
Midway
to the right, bring the wire
over the front to the bottom of the TouchStone.
Bring
the wire midway under the
TouchStone.
Place the
wire on top of the
TouchStone and wrap around the double loop.
Midway,
bring the wire
over the front of the TouchStone.
Bring
the wire under to the
bottom of the TouchStone.
Place the
wire on top of the
TouchStone from the bottom center.
Bring
the wire under the bottom
of the TouchStone.
Twist
the wire around the loop below
the top of the TouchStone.
Wrap the
end several times around
the double loop until the end is safe
inside on the front side of
the TouchStone.
Twist
the double loop so that
it is in a direction that the
TouchStone will hang on a chain.
If
you would prefer,
you can have TouchStones
wrapped by us in 14K Gold
or Sterling Silver.
Place an order for wrapped
TouchStones here.
If you want different wire, please
specify the TouchStone color
and the choice of wire wrap in
the comments section of your order.